loading
| Availability: | |
|---|---|
Product Introduction
A PVC washer is a flat, circular disc made of polyvinyl chloride (PVC), a type of plastic. These washers are used to distribute the load of a screw, bolt, or other fastener, preventing damage to the materials being joined and providing a watertight seal in some applications. They are a cost-effective alternative to metal washers and offer good chemical and corrosion resistance.
Corrosion Resistance:
PVC doesn't rust or corrode like metal, making it ideal for environments where moisture or chemicals are present.
Lightweight:
PVC is significantly lighter than metal, reducing the overall weight of assemblies, which can be important in applications like aerospace or electronics.
Cost-Effective:
PVC washers are generally more affordable than metal washers, providing a budget-friendly solution for various applications.
Electrical Insulation:
PVC is a good insulator, making PVC washers suitable for electrical applications and helping to prevent short circuits or electrical shock.
Chemical Resistance:
PVC can withstand exposure to many chemicals, acids, and bases, making it suitable for use in industrial settings.
Customizability:
PVC washers can be easily molded and shaped, allowing for customized designs and sizes to meet specific needs.
Durability:
PVC is a durable material that can withstand wear and tear, ensuring a long service life for the washers.
Noise and Vibration Dampening:
Some types of plastic, like nylon, can absorb vibrations, which can be beneficial in applications where noise or vibration reduction is desired.
| Model NO | Pvc Washer |
| Material | Plastic |
| OEM | OEM Serviced Accepted |
| Transport Package | Standard Package |
| Specification | 1000SET/BAG |
| Origin | Zhejiang |
| Trademark | Donghuang |
| HS Code | 3926909090 |
Product Uses
Plumbing:
Used in pipe fittings, faucets, and other water-related applications to prevent leaks and distribute pressure.
Electronics:
Used as insulators in electronic components and to prevent short circuits.
Automotive:
Used in various parts of vehicles to dampen vibrations, reduce noise, and distribute loads.
Furniture:
Used in furniture assembly to protect surfaces and prevent screws from loosening.
Marine:
Used in boat construction and repair due to their resistance to saltwater and corrosion.
HVAC:
Used in heating, ventilation, and air conditioning systems to prevent leaks and ensure proper connections.
Construction:
Used in various building and construction applications, including securing roofing and siding.
Medical:
Used in medical devices and equipment for their biocompatibility and resistance to sterilization.
Product Operate Guide
1. Select the right size:
Ensure the washer is compatible with the pipe and fitting size.
2. Position the washer:
Slip the washer over the pipe, ensuring it sits flush against the surface where the two pieces will connect.
3. Connect the pipes:
Slide the other pipe or fitting into place, ensuring it overlaps the first pipe.
4. Tighten the connection:
Use a slip joint nut to tighten the connection. Hand-tightening is often sufficient, but some situations may require pliers for a tighter seal, says Family Handyman.
5. Check for leaks:
After tightening, inspect the connection for any signs of leakage. If leaks occur, ensure the washer is properly seated and the connection is tight enough.
FAQ
1. Are you a direct manufacturer or trading company?
We are a manufacturer, we also have our own international sales department. we produce and sell all by ourselves.
2.What products can you offer?
Our main product range is expansion screw, fastener, hardware, plastic parts, stamping parts, zinc die casting and some non-standard parts.
3.What applications do your products relate to?
Our products almost cover the entire construction industry and the applicable fields of mechanical equipment installation, mainly including outdoor large-scale mechanical equipment installation, home decoration, fixed installation of goods, etc.
4.Can you do customized products?
yes.
5. How to guarantee the quality of your goods?
Firstly, we will do the inspection after every process. For the finished products, we will do 100% inspection according to the customers' requirements and the international standard.
6.What’s the payment term?
When we quote for you, we will confirm with you the way of transaction, fob, cif, cnf, etc.
For mass production goods, you need to pay 30% deposit before producing and 70% balance against copy of documents. The most common way is by T/T.L/C is also acceptable.
