Concrete nails with washers are specialized, hardened steel fasteners designed for hand-hammering materials like wood or metal to concrete or masonry surfaces. The pre-mounted washer provides a larger bearing surface, which increases pull-over resistance and improves the nail's holding power, preventing it from pulling through the attached material.
Our Concrete Shooting Nail With Metal Washer from Donghuang is a professional-grade fastening solution engineered for securing wood, metal, and other materials to concrete or masonry surfaces. Crafted from hardened 45# or 60# steel with a corrosion-resistant zinc plated finish, this pre-assembled fastener integrates a durable metal washer to deliver unmatched performance in construction, home improvement, and industrial applications. The integrated washer expands the bearing surface area, solving common pain points like pull-through in soft materials and loosening over time—making it a reliable choice for both professional contractors and DIY enthusiasts.
The pre-mounted metal washer distributes load across a wider area, preventing wood, thin metal sheets, or other soft materials from being pulled through the fastener into concrete. This design ensures a tight, long-lasting bond that outperforms standard concrete nails, especially in high-stress applications like formwork or batten installation.
Made from high-strength hardened steel, our Concrete Shooting Nail With Metal Washer resists loosening or pulling out from concrete substrates. This critical feature maintains structural integrity over time, even in outdoor or high-moisture environments, thanks to its corrosion-resistant zinc plating.
As a single pre-assembled unit (nail + washer), there’s no need for extra components or time-consuming setup. Whether using a hammer or compatible driver, you can drive the nail quickly and efficiently—saving valuable time on construction sites or home projects.
Designed to adapt to diverse needs, this concrete nail works seamlessly with concrete, masonry, and stone. It’s the go-to fastener for everything from residential home decoration to large-scale industrial equipment installation.
Constructed with 45# or 60# hardened steel, the nail resists buckling and bending under pressure. The zinc-plated finish adds an extra layer of protection against rust and corrosion, making it suitable for both indoor and outdoor use.
Specification | Details |
Brand Name | Donghuang |
Material | 45# Steel, 60# Steel (Hardened High-Strength) |
Finish | Zinc Plated (Corrosion-Resistant) |
Head Style | Flat, Double Cap |
Head Diameter | 2mm-12mm |
Type | Concrete Shooting Nail With Metal Washer |
Place of Origin | China |
Minimum Order Quantity (MOQ) | 2 TON |
Packing | 25kg/carton or small box (customizable) |
Ideal for securing 2x4s, plywood, floor/wall battens, and formwork boards to concrete. Perfect for residential renovations, commercial construction, or temporary structures that require reliable holding power.
Secures metal tracks for plasterboard/drylining systems and metal lath for drywall installation. Ensures metal components stay firmly anchored to concrete surfaces without slipping or loosening.
Attaches termination bars to hold waterproofing membranes and moisture barriers in place. The washer’s wide bearing surface prevents damage to delicate membranes while maintaining a tight seal.
Used to fix wooden elements of safety barriers to concrete in construction sites, outdoor venues, or residential areas. Provides the strength needed to keep safety structures stable.
Drill pilot holes (if necessary) to ease penetration and reduce the risk of concrete cracking. This step is recommended for harder concrete or thicker nails to ensure smooth installation.
Align the Concrete Shooting Nail With Metal Washer perpendicular to the concrete or masonry surface at your target location. Ensure the washer is flush against the material being fastened for optimal pressure distribution.
Use a hammer or compatible driver to drive the nail to the correct embedment depth. Avoid over-driving, as this can damage the material or reduce holding power.
The pre-mounted washer clamps the fastened material tightly by distributing pressure evenly. After driving, confirm the washer is securely seated to maximize pull-over resistance.
Yes! The zinc-plated finish provides corrosion resistance, making them ideal for outdoor applications like safety barriers or exterior waterproofing systems.
It works with wood (2x4s, plywood, battens), metal (tracks, lath), waterproofing membranes, and termination bars—all secured to concrete or masonry.
Pilot holes are optional but recommended for harder concrete or larger nail sizes (8mm-12mm head diameter) to prevent cracking and simplify driving.
The minimum order quantity is 2 TON. Custom packing and specifications are available for bulk orders.
We conduct in-process inspections after every production step and 100% inspection of finished products per international standards and customer requirements.
2 TON per order, with flexible customization options for bulk buyers.
Standard packaging is 25kg/carton or small box. Custom packaging solutions are available upon request.
We accept T/T (30% deposit before production, 70% balance against document copy) and L/C. Shipping terms (FOB/CIF/CNF) are negotiable.
Contact our sales team for a detailed lead time based on your order quantity and customization needs.
Donghuang is a direct manufacturer with its own international sales department. We design, produce, and sell directly to customers, eliminating middlemen and ensuring competitive pricing.
Every Concrete Shooting Nail With Metal Washer undergoes rigorous testing, from raw material inspection to finished product validation, to meet global standards.
Our products cover the entire construction industry and mechanical equipment installation, including outdoor large-scale machinery, home decoration, and goods fixation. We also offer customized non-standard parts to meet unique project needs.
